Model Number: DT-619
Brand Name: CEM
Key Specifications/Special Features:
Easy to set area dimensions (up to 8 points)20 points average; max./min. record for single point Continuous moving average for up to 2 hours Data hold and max./min. hold...
Model Number: DT-880
Brand Name: CEM
Key Specifications/Special Features:
Unique flat surfaceMini modern housing designWide range temperature measurements from 150.0 to 550 degrees Celsius or -58.0 to 1,022 degrees FahrenheitBuilt-in laser poi...
Model Number: DT-156
Brand Name: CEM
Key Specifications/Special Features:
Dual technology features automatic selection of magnetic induction or Eddy current measurement techniquesFeatures:Non-magnetic coatings (paint, zinc) on steelInsulating co...
Model Number: DT-1301
Brand Name: CEM
Key Specifications/Special Features:
Pocket size; easy to use and lightweight3 1/2 digit LCD with LUX, fc, LOBAT, MAX, HOLD indicatorAccurate display light level in terms of foot candles( Fc) or LUX over a...
Model Number: DT-1309
Key Specifications/Special Features:
USB output4,000 counts digit LCD with LUX/FC, LOBAT and indicatorAuto ranging40 segments analog bar-graphAuto power-offMaximum and data holdPeak holdLow battery indicationMeasuring ran...
Model Number: DT-8839
Brand Name: CEM
Key Specifications/Special Features:
High distance to spot size ratio: 50:1, measuring smaller surface at greater distancesLCD with backlightWide temperature range: -50 to 1,000 deg. C/-58 to 1,832 degrees...
Model Number: DT-185
Brand Name: CEM
Key Specifications/Special Features:
Features:Alarm setup and indicationRecording and low battery indicationManual and automatic start modeUSB port for data traffic and power supplyStatus indication via red...
Model Number: DT-8809A
Brand Name: CEM
Key Specifications/Special Features:
Precision instrument used to measure illuminance (lux, footcandle) in the fieldMeet CIE photopic spectral responseFully cosine corrected for the angular incidence of l...
Model Number: DT-8801
Brand Name: CEM
Key Specifications/Special Features:
DT-8801 compact infrared thermometers provides much faster,easy and accurate readings for most surface temperature measurementsFeatures:User selectable: ℃ or ℉Single la...
Model Number: DT-8851
Brand Name: CEM
Key Specifications/Special Features:
This unit confirms to the IEC61672-1Maximum and minimum measurementsA and C weightingFast and slow responseAnalog AC/DC outputs for connection to frequency analyzer or ...
Model Number: DT-318
Brand Name: CEM
Key Specifications/Special Features:
16-inch Gooseneck detector is easy to measure the hard-to-reach areasAir Velocity and Temperature measurements displayed on multi-functionFull 4-digit display of air vel...
Model Number: IR-97
Brand Name: CEM
Key Specifications/Special Features:
The IR-97 food safety infrared and contact thermometer for surface scans with a probe thermometer and alarm monitoring for internal temperature readings.Features:Built-in...
Model Number: DT-9812
Brand Name: CEM
Key Specifications/Special Features:
Features: Shielded transformer jaw opens to 68mm diameterMeasurement from mA up to AC 1,000A True RMS animals an accurate measurement for distorted waveformsDesigned to...
Model Number: AC-8T
Brand Name: CEM
Key Specifications/Special Features:
2-in-1 infrared thermometer with non-contact voltage (NCV) provides easy and safety measurement. Checking all types of A/C, electronics and heating systems.Features:IR te...
Model Number: DT-9133
Brand Name: CEM
Key Specifications/Special Features:
Lamp tester tests HID and fluorescent lamps and has live conductor sensing.This electrical lamp tester has a compact, rugged housing with carrying case (included).
...
Model Number: DT-8666
Brand Name: CEM
Key Specifications/Special Features:
DT-8666/8666H thermal leak detector is visible for higher/lower temperatureIt permits targeted scanning to find higher/lower temperature with continuous audible alarmIt...
Model Number: DT-9903
Brand Name: CEM
Key Specifications/Special Features:
Automatically turns power on and offAutomatically selects continuity or DC/AC voltageMaximum voltage between any terminal and earth ground: 1,000V DC/ACRMS overvoltage ...
Model Number: DT-82
Brand Name: CEM
Key Specifications/Special Features:
Specifications:Function: m/s (meter per second)Range: 0.40-25.00Accuracy: ±3.5%±0.2m/sFunction: ft/min (feet per minute)Range: 80-2980Accuracy: ±3.5%±40 ft/minFunction: k...
Model Number: DT-337
Brand Name: CEM
Key Specifications/Special Features:
Designed to verify the presence of load current, voltage and resistance The small body and clamp jaw fit perfectly in your hand1mA high resolution for AC/DC current meas...
Model Number: DT-618
Brand Name: CEM
Key Specifications/Special Features:
Features:Measurement of wind velocity and temperature, holding the reading and finding the Max./MinSensitive and accurate (ultra low friction jewel bearing)Ergonomic and...